A USB Spy Camera is a hidden camera. It can be placed at your home or even at your workplace to monitor people or things happening around them. Even though the device is really small but it works wonders. It resembles a USB flash drive.
So, the hidden camera is hardly noticed by anyone. Here you will get to know the step by step instructions on how to use this camera. The usb spy camera instructions provided here can be useful for most of the cameras. You will also get the knowledge about certain things you should know before using a spy camera.
Table of Contents
USB Spy Camera Instructions – Step By Step Guide
You can follow these steps for most of the USB Spy Cameras:-
Step 1. Charging The Device
Dealing with a USB Spy camera is quite simple. Such devices come with a battery that needs to be recharged from time to time. Most of the time you don’t get a separate charger for the USB Spy camera. Look at these list of USB spy cameras to get some idea.
In such cases, you need to plug in the device into the USB port of your laptop or pc to be able to charge it. Once you plug in the device the indicator light will start flashing. And it will stop flashing once the battery is full. It will go into sleep mode if the battery is low. In order to be able to use it, you will have to charge it again from your laptop or pc.
Step 2. Installing a Micro SD card
You can always buy a Micro SD card if it didn’t come along with your USB Spy camera. It will be easily available in any local camera or mobile store. You need to install the MicroSD card to be able to record from the camera. You need to remove the cover to find the slot. There will be both microSD and SDHC slots available.
Insert your card in the MicroSD slot. Then press the record button. The indicator light will start blinking in case the MicroSD card is not installed properly. Then your device will shut off. If you press the on/off button for three seconds you can test if the MicroSD card has been installed properly. The indicator light will be stable if the camera is ready to use and the card has been inserted properly.
Step 3. How To Record
To record videos, press the video record button for three seconds. The device will start recording when the indicator light will blink thrice in a row and stop.
You need to press the button once when you have to stop the camera from recording. Once you press the video button, the indicator light will blink a couple of times and will eventually stop.
Don’t power off the device straight away. It needs time to copy the recorded files on your MicroSD card. It is recommended to copy the recorded files on your laptop or pc. This step will save them from being deleted when your device will be recording again. The area you want to record should be around 50 to 60 cm away from the camera.
Step 4. Pairing The Device With Your Computer
Put the USB camera inside the UBS port of your pc or laptop. It resembles a USB flash drive. In fact, it even works like a USB flash drive. If the indicator light starts blinking, the device needs to be charged. Let the battery charge itself while being connected to your pc/laptop. Meanwhile, you can check the folders and save the data you need into your computer or the cloud storage. For this, make sure that your MicroSD card is inserted in the USB device.
It is recommended to clear the MicroSD card after every use to make enough space for the next recording. This way the data already present in the card won’t be erased. The unwanted recordings can be deleted from the computer as well. Technically, it works like any other USB flash drive.
What You Should Know Before Following USB Spy Camera Instructions?
1. Find A Suitable Camera According To Your Needs
Before purchasing the camera make sure it is fit for the area you want to install it in. Nowadays a hidden camera can be placed in many things like pens, sunglasses, etc. For example these is the list of best hidden cameras in glasses.
Some devices are not fit for outdoors. So, before purchasing a USB Spy Camera decide the location where you want to place it in. You can purchase a USB camera if you are sure that a computer will be present in the same room.
2. Proper Lighting
You should aim to record high-quality videos. To achieve this you must understand the lighting. The great hiding spots will be of no use if there is no proper lighting in the room. Bad lighting will spoil your recorded video. You can either move the light source in the room or you can change the location of the camera. The common lighting situations are:-
1. Side Lighting– When the light source is present on either side of the camera. It can create a shadow on the opposite side. The shadows can obstruct the side details and lead to bad quality footage.
2. Front lighting– You can take the most advantage from front lighting. Front lighting is when the light source is behind the camera. It means that the light falls on the subject. Very clear videos are recorded in such lighting.
3. Backlighting– This type of lighting gives footage in the form of a silhouette. In backlighting, the light source is in front of the camera. This should be avoided.
3. Use Chokepoints For Installing The Camera
Make sure that you utilize the most active spots where most activities will take place. Doorways, entrances are examples of chokepoints. Hence, it is recommended to discover chokepoints to place a camera.
4. Use A High-Quality Microsd Card
Purchase the memory card according to the speed and class of the camera’s resolution. The appropriate memory card will give you the best result by saving the videos at the rate it can sustain.
Rated Speed– It is the speed at which the memory card writes or reads the files. It is calculated in the “mbs” unit. A good mbs will make your device faster. It helps a lot while working with high-resolution cameras.
Speed Class– The footages are saved in the camera in the form of a steady stream of data. This steady stream of data is responsible for the resolution of the footage.
SD card size– You need to know the maximum amount of data that your camera can handle. You will not be able to save the videos in the SD Card if it’s memory is more than what the camera can handle.
Hence, while buying an SD card, consider all the factors related to speed, class, and size.
5. Take The Best Out Of Your Surroundings
Find the best location to hide your camera. Most of the time you don’t need to get anything extra to hide the camera in.
5. Perform A Test Run
Place your camera in the best location where you will get good lighting. Turn on the camera and make test footage. This will make sure that you get the desired result after the final shot.
6. Night Vision Spy Cameras
Some amount of ambient light is required by the night vision cameras. Getting clear footage will be hard if the subject is too far from the camera because of the small size of the device. So, an additional source of light will be great if it is possible. Otherwise, there are chances that the subject will be less visible in the footage. Ambient light can be in the form of a lit-up computer screen.
1. How to reset the USB Spy Camera?
Use the pin tool you get along the camera to hold the appropriate button. Hold it for 5 seconds. The device will be reset in the next 30 seconds and you will be notified by the blink of the indicator light.
2. Which are the best USB Spy cameras?
MEYUEWAL USB Spy Camera and ABOUR USB Hidden Spy Camera. They are one of the best USB Spy cameras in the market right now.
3. What is the best hiding place for a spy camera?
The nightstand, bookshelves, near TV or computer are the best places for hiding spy cameras.
4. Which is the smallest hidden camera?
The ” SUPER MINI HIDDEN SPY CAMERA” is the smallest hidden camera in the market.
If you use a USB flash drive Spy Camera properly, it’ll turn out to be a very helpful device. This device can be used at both home and workplace as a security measure. It monitors things happening around the area and helps you protect the environment. The USB spy camera instructions that will be provided here can be used for most of the USB Spy Cameras.